Feliz Auto Detail
Feliz Auto Detail applies professional-grade ceramic coating to trucks, SUVs, and sedans across San Diego — so your vehicle stays cleaner, longer, and looks like you just drove it off the lot.
Get a Free Quote NowWe start with a thorough hand wash, followed by an iron remover and clay bar treatment. This strips every layer of contamination from the surface so the coating bonds directly to your paint — not to dirt.
We inspect every panel under high-intensity lighting. If there are swirl marks, water spots, or light scratches, we correct them before coating. Ceramic coating locks in whatever's underneath it — so the surface has to be right first.
Every panel is wiped down with an IPA solution to remove any polish residue or oils. This is the step most people skip — and it's the reason some coatings fail or look uneven. We don't skip it.
The ceramic coating is applied one panel at a time using applicator blocks and microfiber suede cloths. Each section is leveled before moving to the next. Rushing this step causes high spots and streaks — we work methodically.
After application, the coating needs time to cure and bond to the paint. We'll walk you through what to avoid in the first 24-48 hours so you don't compromise the finish before it sets.
We check every panel in multiple lighting conditions before we hand your vehicle back. You'll be able to see exactly what was done — and the difference will be obvious.
Ceramic coating is the right call if you drive a truck, SUV, or sedan you plan to keep for more than a year and you're tired of waxing it every few months. It's also the first thing we recommend for anyone in San Diego driving near the coast — salt air and UV exposure are hard on clear coat, and a ceramic layer blocks both.